HardwareX Supply

UPGRADED- Reinforce 6200ZZ bearing for high performance durability. SEALED - Clear cap provide additional protection to the 6200ZZ preventing dust and grime to penetrate the bearing. NYLON – 2” Nylon roller to provide smooth and ultra quiet operation. SIZE - Roller diameter 1.75" for 2" track. 4" inch length stem. TESTED - Roller specified to perform up to 100,000 cycles at 160Lbs load test.

Read more less

HEAVY DUTY harden steel open bar holder bracket with 4mm thickness SPECIFICATION fit 2x4 standard lumber board to lock the door closed from the inside for extra reinforce security. FINISH black powder coating finish to provide long lasting rust proof for indoor and outdoor application AVAILABLE in variety 2pack or 4 pack brackets EASY TO INSTALL with included 1.625" matching black screws

Read more less

Keep your home safe. Cannot be broken from the outside. Door Guard Designed to withstand 1000 lbs. of force. Installs in just minutes using hardened screws (included) Rugged metal construction（aluminum） High Quality process keeps the lock from fading.

Read more less

HEAVY DUTY – 14 gauge premium wide body hinges with 6200ZZ reinforce bearing for smooth high performance durability. SEALED – Clear cap provide additional protection to the 6200ZZ preventing dust and grime to penetrate the bearing. TUNE UP KIT 7' height Include 11x #1 Hinges, 2x #2 Hinges, 2x #3 Hinges, 2x Top Brackets, 10x 6200ZZ Sealed Cap Bearing Nylon Rollers, Cable for 7’, and mounting screw hardware. 8'  height Include 14x #1 Hinges, 2x #2 Hinges, 2x #3 Hinges, 2x #4 Hinges, 2x Top Brackets, 12x 6200ZZ Sealed Cap Bearing Nylon Rollers, Cable for 8’, and mounting screw hardware NYLON – 2” Nylon roller to provide smooth and ultra quiet operation. 4 inch length Stem. TESTED - Roller specified to perform over 100,000 cycles at 160Lbs load test. Available for 7' height(16'x7' or 18'x7') or 8' height (16'x8' or 18'x8') garage door.

Read more less

HEAVY DUTY – 14 gauge premium wide body hinges for high performance durability. Thicker gauge help support the weight of heavier garage door. and reduce noise. SIZE - Available in #1 , #2, #3 and #4 hinges. SCREWS - Mounting Screws are included. TUNE UP - hinges for both new and old garage doors. PACKS - Available in 2 packs.

Read more less

ELECTROPHORESIS black coated garage door torsion springs with min 18,000 cycles. Never need to lubricate the spring and keep you hands clean. AVAILABLE in variety of spring wire diameter, inner diameter, and length to fit most garage door. ORDERING It's important to use the correct garage door torsion springs, as it is related to your safety during operation. Please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used. INSTALLATION Although it is easy to install, but we do not recommended you to install them yourself unless you have the right tools and reasonable mechanical aptitude or experience, because the torsion springs can be dangerous if they are improperly installed or mishandled. PACKAGE include pair of spring, non-slip winding bars, non-slip gloves, and installation instruction.

Read more less

HEAVY DUTY double looped ends are two coils of the spring that connect to the eye-bolt and the pulley. This provide a sturdy replacement than single loops in the market. ELECTROPHORESIS black coating with min 16,000 cycles. Never need to lubricate the spring and keep you hands clean. AVAILABLE in color coded 90lb, 100lb, 110lb, 120lb, 130lb, 140lb, 150lb, 160lb, 170lb, and 180lb weight capacity to fit most 7ft height door. ORDERING - Please know the height and weight of your garage door before ordering. Extension spring are color coded, but the color repeat every hundred pounds. Tip : Use a analog scale and place in center of the garage door. Release the extension spring and record the weight on the scale. SAFETY cable with the extra length of 144" x 1/8" 7x7 strand to avoid any spring to fly all over and during and after installation. The safety spring include 2 pcs S hook and 2 pcs three-eye splint. EASY TO INSTALL include 1 pair extension spring, 1 pair safety cable, and instruction.

Read more less

HEAVY DUTY 12 Gauge steel with 3 3/8" from center of bearing to where it mounts. SEALED 1641-2RS ball bearing to reduce replacement frequency and maintenance cost UPGRADED ball bearing provide superior quality and higher durability UNIVERSAL fit for standard 7' and 8' garage door. 1" bore diameter bearing. REPLACEMENT for worn out bearing, sold as pair (left & right)

Read more less

CABLE DRUM - Drum Set Designed for Garage Doors with Maximum Height of 8' (can be used on 7' door). This Drum Can Safely Support Doors Weighing Up to 530lbs. SIZE - Cable Maximum Size 1/8". Compatible with Standard-Lift Overhead-Type Garage Doors. PAIR - Garage door drums are sold in pairs, consisting of one right and one left drum. DURABLE - Crafted from durable die-cast aluminum alloy. EASY TO INSTALL - Each drum features 2 set screws for a secure and snug fit.

Read more less

3 INCH - Garage door pulley kit, meticulously crafted to address the woes of your worn-out, noisy, and erratic garage doors. Designed to repair or replace damaged components, it promises a transformation from clunky to serene, offering a tranquil and seamless door opening and closing experience. Say goodbye to the bothersome noise and jolts with this kit, ushering in a new era of quiet, smooth, and delightful garage operations. HEAVY DUTY - Galvanized steel garage door pulley system is built for heavy-duty performance, boasting a robust 200lb load rating suitable for doors weighing up to 400lb. Crafted from durable steel, it ensures longevity and reliability. Featuring a center race with 9 ball bearings, this system is meticulously engineered for smooth sliding action. Moreover, it comes pre-lubricated from the factory, guaranteeing effortless operation right out of the box. COMPATIBLE -The 3-inch sheave pulley features a 3/8" bore and a 3/8" cable groove, meticulously engineered to accommodate the majority of garage door setups. Compatible with a maximum pulling cable or straps diameter of 5/16", it ensures seamless integration and reliable performance with a wide range of garage door systems. EASY TO INSTALL - Kit Includes 4 pulleys, 2 clevis forks, and screw/nuts. This versatile set-up allows for use as 2 fixed pulleys alongside 2 sliding clevis wheel pulleys, catering to your diverse needs. FINISH - Available in Gavanized Steel finish.

Read more less

HEAVY DUTY bottom lift brackets are crafted from 13-gauge galvanized steel to ensure durability and strength. COMPATIBLE design to accommodate 7/16” diameter garage roller stem. APPLICATION the bottom lift bracket is compatible with sectional garage doors made of wood, fiberglass, and aluminum paneling, offering versatility across various garage door models. EASY TO INSTALL with included left bottom bracket, right bottom bracket, and hardware screws. VERSATILE whether you're looking to replace your current bracket or enhance your garage door hardware, our product offers dependable performance and is a trusted choice.

Read more less

HEAVY DUTY - French cleat hanger is made of 5mm thickness aluminum. WEIGHT SUPPORT - Available in 4 inch (Up to 50 lb), 12 inch(Up to 80 lb), 18 inch(Up to 90 lb), and 30 inch(Up to 120 lb). MULTI PURPOSE - Ideal tool for hanging mounting wall panels, whiteboard, cabinet, shelf, headboard, art, frames, pictures, mirror and more SLEEK - design leave minimum gap between the wall and brackets. This will provide a near flush mount separation from the wall. EASY TO INSTALL – The wall mounting brackets hardware kit will include self-tapping screws that can be installed in minutes. FLEXIBILITY – Interlocking wall mounting bracket allow easy removal just lifting the panel.

Read more less