Audio
Dayton Audio Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio
Real-time signal processing for ultimate control Complete audio customization for application specific installations Easy-to-use Graphical User Interface (GUI) All eight output channels have a fully adjustable 10-band parametric EQ Optional Bluetooth dongle (for streaming and app control) and wired remote available
$176.99
Parts Express Parts Express ST-17D BSR/Fisher Type Replacement Stylus Needle
Replaces the followung BSR needles: ST-16, ST-17, ST-18, ST-19 AND SINGLE Tip ST-20, ST-21 Used in the following BSR cartridges: SC5H, SC7M, SC8H, SC10H, SC12H Speeds: All Tip Material: .0007 Diamond Tip; Radius: .003 Synthetic Sapphire
$13.99
Dayton Audio Dayton Audio BPA-38G HD Binding Post Banana Jack Pair Gold
24kt. gold plating for best signal transfer and corrosion resistance 1-1/2" rear bolt mounts in speaker cabinets from 3/8" to 1" thick Large diameter knurled heads enable positive finger-tight connections Knurled shaft prevents post rotation
$15.99
Dayton Audio Dayton Audio UMM-6 USB Measurement Microphone
Precision condenser microphone for critical measurement and recording applications Connects to your PC or Mac via USB port True omnidirectional pattern and calibrated flat frequency response Rugged construction with high-quality components Compact design; includes sturdy carrying case with foam insert
$104.99
Parts Express Parts Express 8 Ohm 100W Non-Inductive Dummy Load Resistor
Non-inductive dummy load resistors are a must for bench testing amplifiers. Also useful for testing loudspeakers and other audio circuits requiring an 8 ohm load. 5% tolerance. Dimensions: 6-1/2" L x 1-9/16" W x 3/4" H; Inner width of the screw holes: 5.4 mm; Inside edge to inside edge measurement between the two screw holes: ~144 mm.
$20.99
Dayton Audio Dayton Audio DSP-BT4.0 Bluetooth Data and Streaming USB Interface for DSP-408
Stream your favorite music to your Dayton Audio DSP-408 with the DSP-BT4.0. This Bluetooth dongle not only allows you to stream audio content directly to your DSP-408, it also allows you to wirelessly control your DSP with the DSP-408 Android or iOS app. Key Features Stream your favorite music to the DSP-408 with aptX Bluetooth Wirelessly control your DSP-408 from an Android or iOS device
$62.99
Dayton Audio Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm
Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure
$27.99
Dayton Audio Dayton Audio DSS2-BC Black Chrome Speaker Spike Set 4 Pcs
Rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system dramatically improves clarity, stereo imaging, and bass response. This is especially apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable finish. Barbed insert nuts and 6 mm threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes four cone spikes, four floor discs, four barbed insert nuts, and four threaded studs. Cone is 5/8", insert requires a 5/16" hole to be drilled prior to installation. • Dimensions: 9/16" diameter, 5/8" high (including disc).
$15.99
Dayton Audio Dayton Audio TT25 PUCK Tactile Transducer Mini Bass Shaker
The PUCK by Dayton Audio is a small tactile transducer or mini bass shaker that is intended to be used in Home Theater, Gaming, and Auto Sound applications. Now includes convenient surface mounting kit for quick and easy installation onto any flat surface. Key Features Add a new level of impact to games, home theaters, and car audio systems Includes surface mounting ring for quick installation onto flat surfaces Add tactile feedback to chairs and couches for the ultimate gaming and movie experience Small and easy to install even when space is at a minimum
$17.99
Parts Express Parts Express Nickel Plated Nibbling Tool
Simply drill 3/8" hole insert cutting head and compress handles. Gives you the ability to make square holes for fuse holders, special connectors displays etc. Material to be nibbled is placed in the gap between the punch and blade channel. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal. A scribe line can be followed by looking down on work in this position. A slot is cut by making successive cuts.
$15.99
Parts Express Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black
Parts Express Steel Mesh 2-Piece Grill for 8" Speaker BlackConvenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Heavy-duty expanded steel mesh design. Grill fits 8" speaker with a maximum outer diameter of 8-1/4". Overall diameter: 8-3/8". Sold individually.
$16.99
Dayton Audio Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciter 24W 4 Ohm
Small size; just under 2" diameter, about 7/8" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 24 watt RMS power handling for high output
$17.99
Dayton Audio Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm
Small size; just under 2" diameter, about 9/16" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1" voice coil for 10 watt RMS power handling
$16.99
Dayton Audio Dayton Audio PC68-4 2-1/2" Full-Range Poly Cone Driver
Poly damped woven glass fiber cone controls cone break-up and provides a smooth roll-off High energy ferrite magnet increases BL for higher efficiency and increased output Rubber surround improves cone linearity and transients Smooth response with true full-range reproduction for simple speaker designs
$16.99
Parts Express Parts Express Speaker Gasketing Tape 1/8" x 3/8" x 50 ft. Roll
Finally! A foam gasketing tape designed specifically for loudspeakers! This specially designed foam tape is excellent for making an airtight seal around drivers, terminals, handles, horn lenses, or any other item that you're installing in a cabinet! Key Features Perfect for drivers, handles, horns, or anything that needs to be air-tight Ensures a good seal to enclosures Adhesive backed for easy installation
$19.99
Parts Express Parts Express Speaker L-Pad Attenuator 50W Mono 3/8" Shaft 8 Ohm
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft length, and comes with mounting hardware. Key Features Easy level adjustment without changing impedance Great for speaker design tweaking Maintains 8 ohm impedance Mounting hardware included
$16.99
Parts Express Parts Express Mini Stereo Lightweight Headphones with 4 Foot Cord
Standard mini headphones for home stereo or Walkman type use. Very inexpensive headphones makes for convenient back up or disposable use. Key Features Low cost headphones Comfortable lightweight design Great for Walkmans
$9.99
Parts Express Parts Express A-T Style Phono Headshell with Lead Wires & Gold Plated Contacts
Add a more stylish look to your turntable's S-shaped tonearm with this universal, gold plated contacts, aluminum headshell. Having two different cartridges and headshells makes your turntable more versatile. Key Features Aluminum die-cast construction with integral finger lift 24 Karat gold-plated pre-installed lead wires For use with standard 2-screw magnetic cartridges Fits all "S" shaped tonearms with standard H-4 Bayonet Mount
$20.99
Parts Express Parts Express 3AG / AGC Screw Terminal Fuse Holder 5-Pack
This fuse holder is perfect for 1-1/4" fuse lamps and normal fuses. The screws on each side make it easy to connect wires without crimping or soldering and the extended plastic reduces accidental shock. Key Features Screw terminals for easy hook-up Extended plastic on each side to prevent accidental shocks and short circuits Holds common 1-1/4" size fuses and fuse lamps Economical 5-pack
$10.99
Parts Express Parts Express Cast Frame #10-32 Speaker Mounting Kit
Get that professional look with these black anodized hex head cap screws. The perfect mounting head for aluminum cast frame speakers. Large enough to secure the frame yet small enough to not deform paper and cork gaskets. Key Features 5/16" (8 mm) outer diameter head for holes in most medium size drivers
$9.99
Parts Express Parts Express Angled Locking Stacking Banana Plug with Dual Set Screws Poly Shell and Insulated Thumbscrew 2 Pair
Milled from solid brass, and 24-karat gold plated for maximum signal transfer, these locking, expanding, angled, and stackable, banana plugs feature a polycarbonate shell to provide protection from unintended contact while accepting up to 8 AWG wire. Key Features Locking pin separates the plug increasing retention force Stackable for use with bi-wired speakers Color-coded polycarbonate shells Dual hex screws for maximum cable retention 24 karat gold plated contact surfaces
$26.99
Parts Express Parts Express Binding Post Banana Jack with 1" Thread 2 Pair Black Gold
These connectors are designed with the audiophile in mind. 24 kt gold plating ensures the highest possible signal transfer and resists harsh environmental corrosion. These precision-machined connectors are made to last and last.
$19.99
Parts Express Parts Express HDMI Cable Signal Tester
Easy to use; compact and portable Simply plug your cables into the tester''s DVI-F and HDMI-F connectors Diagnoses the cause of color shift, sparkle, or missing picture Tester can be located at the source or display end of the system Displays the status of each HDMI signal component
$30.99
Dayton Audio Dayton Audio BST-2 Tactile Bass Shaker 35 Watt
Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface
$38.99
You have seen 24 out of 31 products
Trending Products
$24.99
$77.99
$20.99
$22.99 - $29.99
$26.99$24.99
