🌼 Spring Giveaway 🌼
3 Prizes, 3 Chances to Win - Enter Today

  • Banner image for: Banner image for:

E3D

14 products


  • E3D Prusa MK3 MK3S V6 HotEnd Kit

    E3D E3D Prusa MK3 MK3S V6 HotEnd Kit

    48 reviews

    Fits MK3 and MK3S Provides more reliability with retractions when using the MMU Prusa heatbreak & thermistor Maximum temperature: 285degC Drop-in replacement

    $76.99

  • E3D Hotend Thermistor Cartridge Replacement

    E3D E3D Hotend Thermistor Cartridge Replacement

    Direct replacement of cartridge type thermistor in E3D hotends. A custom made thermistor encapsulated into an easy to use cartridge package. Genuine Semitec 104GT thermistors used. Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)

    $13.99

  • E3D Hardened Steel Nozzle V6 1.75mm x 0.40mm

    E3D E3D Hardened Steel Nozzle V6 1.75mm x 0.40mm

    Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.

    $25.99

  • E3D V6 Extra Nozzle 1.75mm x 0.40mm

    E3D E3D V6 Extra Nozzle 1.75mm x 0.40mm

    Genuine E3D V6 replacement nozzle for 1.75mm filament at .40 mm nozzle size. This premium quality E3D replacement nozzle allows you to truly customize each and every print. This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D

    $13.99

  • E3D V6 Socks Pro 3 pack

    E3D E3D V6 Socks Pro 3 pack

    Genuine E3D Parts ONLY works for HotEnds which use the E3D V6 style heater block 3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds These socks will keep your nozzle clean These socks really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles

    $11.99

  • E3D Prusa Thermistor

    E3D E3D Prusa Thermistor

    A standard Semitec thermistor cartridge with a Prusa specific extension cable and connector. This is the same thermistor supplied directly to Prusa.

    $15.79

  • E3D Nozzle X - V6 1.75mm x 0.40mm

    E3D E3D Nozzle X - V6 1.75mm x 0.40mm

    Less build up, particularly of sticky and filled materials to the nozzle cone Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.

    $40.99

  • E3D V6 Extra Nozzle 1.75mm x 0.60mm

    E3D E3D V6 Extra Nozzle 1.75mm x 0.60mm

    Genuine E3D V6 replacement nozzle for 1.75mm filament at .60 mm nozzle size. This premium quality E3D replacement nozzle allows you to truly customize each and every print. This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D.

    $13.99

  • E3D V6 Heater Block for Sensor Cartridges

    E3D E3D V6 Heater Block for Sensor Cartridges

    A replacement aluminium V6 heater block, suitable for E3D cartridge-style temperature sensors.

    $20.99

  • E3D V6 Plated Copper Nozzle 1.75mm x 0.40mm

    E3D E3D V6 Plated Copper Nozzle 1.75mm x 0.40mm

    Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. 

    $21.99

  • E3D V6 Heat Break

    E3D E3D V6 Heat Break

    Fits all e3d V6 hotends 1.75mm filament

    $16.99

  • E3D V6 All-Metal HotEnd Full Kit w/ Bowden Add-on 24v

    E3D E3D V6 All-Metal HotEnd Full Kit w/ Bowden Add-on 24v

    E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V). The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance. Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more. Original E3D package. Assembly instruction available on E3D website.

    $78.99

  • E3D V6 Nozzle 1.75mm x 0.25mm

    E3D E3D V6 Nozzle 1.75mm x 0.25mm

    Genuine E3D V6 replacement nozzle for 1.75mm filament at .25mm nozzle size. This premium quality E3D replacement nozzle allows you to truly customize each and every print. This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D.

    $17.99

  • E3D V6 Silicone Sock 3 pack

    E3D E3D V6 Silicone Sock 3 pack

    Standard V6 silicone socks are made to insulate the heater block and nozzle for more efficient, stable thermal performance.  Made from an inherently non-stick high-temperature silicone, these socks help keep your nozzles and block free from plastic residue. We supply the socks in a 3 pack because while they are designed to be as durable as possible, they will eventually wear away or perish. Your mileage

    $11.99

Trending Products

Recently Viewed

© 2024 HardwareX Supply, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account