CONVENIENT 15 AMP GFCI – Perfect for use with 15 AMP grounded outlets and plugs.
USER-ATTACHABLE CONVENIENCE – Easily replace the GFCI plug on any power tool or power cord.
RELIABLE SAFETY - Independently-tested and UL- and CUL-listed for safe operation.
DEPENDABLE AUTOMATIC RESET – Restore power to your device automatically after an interruption with the automatic reset.
INCLUDES WIRING HARDWARE – Easily wire to cord gauges 16/3, 14/3, or 12/3 SJTW with the included hardware.
Easy preparation
Timbermate is versatile and may be used for all interior repairs, including repairing edges.
Fast drying
When you’re done with your repair, scoop it up and put it back in the bucket.
Timbermate protects wood and doesn’t harm it.
ELECTROPHORESIS black coated garage door torsion springs with min 18,000 cycles. Never need to lubricate the spring and keep you hands clean.
AVAILABLE in variety of spring wire diameter, inner diameter, and length to fit most garage door.
ORDERING It's important to use the correct garage door torsion springs, as it is related to your safety during operation. Please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used.
INSTALLATION Although it is easy to install, but we do not recommended you to install them yourself unless you have the right tools and reasonable mechanical aptitude or experience, because the torsion springs can be dangerous if they are improperly installed or mishandled.
PACKAGE include pair of spring, non-slip winding bars, non-slip gloves, and installation instruction.
Set of 2 Tenn-Tex false front fake drawer clips (enough for 1 drawer front) with screws
False front clips allow you to easily mount false drawer fronts and false cabinet fronts
False drawer clips work on false drawer fronts with a minimum opening height of 4 ¼”
False front clip model # T-900 by Tenn-Tex
This is the perfect hardware set for your new false front cabinet or drawer installation project
SECURITY - 4 inch surface bolt for added security for doors
SIZE - overall measurement 4-5/16"
HEAVY DUTY - solid brass material to provide long lasting durability
FINISH - Matte Black, Satin Nickel & Polished Brass
INSTALL - all mounting hardware included
Universal Fit - 2" x 16" strips
Eliminates chipped boards
Line up marked boards with the exact blade edge
Includes 5 Strips
Made in USA
Zero Clearance Tape brings a whole new level of precision to your miter saw. Simply apply over the throat of your saw to eliminate chip out and create an exact reference for line up. Made from durable PVC, they will last for many jobs.
Superior in-line crimp splices with just hand tightening!
Temperature range of -23 degrees C to 120 degrees C.
For use with 18-24 gauge wires.
Available in variety packs.
Never have torn pants from your tape measure again. With the SpeedClip securing your tape measure is a breeze. It easily clips over your pants or belt and can even hold a pencil.
For Doors - 1 3/4" thick standard. 4 1/2" minimum stile width required for single or double door application using standard 440 strike and pull lever, thumbpiece and escutcheon trims.
Chassis - Non-ferrous alloy (Panic Grade)
Cover - Non-ferrous alloy. Covers stock hollow metal doors with 161 cutout.
Mounting - Furnished with wood and machine screws. Available with thru bolts on request.
Hand - Handed, specify handing. Center hub for 2 3/4" or 2 3/8" backset.
Latch Bolt - Stainless steel 3/4" throw.
Spring - Stainless steel throughout.
ANSI Standard - A156.3, Grade 2
Crossbar - 1" Dia. Steel, 0.058" thick for 36" or 48" wide doors.
Strike - Roller type.
Dogging Feature - Allen-type key furnished standard.
Mullion - Available.
UL and ULC Listed - 4400 Series for panic.
Finish - US26D Satin Chrome, Dark Bronze Duranodic (duro)
GENERAL SPECIFICATIONS - Simultaneous retraction on both latch and deadbolts from inside by turning the lever in a panic-proof exit situation. Top lock is heavy duty deadbolt with the bottom lock having a cylindrical body . High security with a double locking point using the keyed lock function.
ANSI STANDARDS - Meet ANSI A 156.12 Series 5000 Grade 2 Requirements.
CYLINDER & KEYWAY - 6 pin solid brass "C" keyway, Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/ Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High security Cylinders.
INTERCHANGEABLE CORE - Interchangeable Core Locks will accept compatible 6 or 7 pin cores with BEST, FALCON & ARROW. Prefix "IC" before part number. Available combinated or uncombinated. Temporary construction cores and factory keying with control key & master key available.
HOUSING - Steel and Zinc dichromate finish for rust resistance.
STRIKES - Standard "T" strike furnished with lockset. 2 3/4" x 1 1/8" square strike with deadbolt.
ESCUTCHEON - 9 3/16" x 3 3/16" brass plated. Packed with interior escutcheon. Optional external escutcheon available.
FUNCTIONS - Entrance (Double Locking), Classroom, Storeroom and Dummy available upon request.
DEADBOLT - 1" Throw. Adjustable 2 3/4" or 2 3/8" Brass with hardened steel pin. Standard 2 1/4" X 1" face plate, packed with 1/8" plastic filler for 1 1/8" door prep.
LATCHBOLT - 1/2" Throw. "UL" listed for 3 hour doors. 2 3/4" standard backset with 2 3/8" optional.
TRIM - HIL, ASTOR, DOVE and MANHATTAN designs. Lever length is4 1/4".
DOOR RANGE - 1 3/8" - 1 3/4"
LATCH FACEPLATE - Standard 2 1/4" x 1" faceplate, packed with 1/8" plastic filler for 1 1/8" door preperations.
Center to Center - Can be used with 4" or 5-1/2" CTC
HEAVY DUTY solid brass material mail slot with double flap to provide long lasting durability.
FIT door thickness 1-3/4" with included inside stainless steel sleeve. Prevent mail from falling into hollow core doors.
SPRING loaded double plate for secure tight closure.
FINISH available in satin nickel, matte black, and polished brass.
SIZE available in 13" x 3.625" (Opening 11" x 2-1/4")
EASY TO INSTALL : Instruction and mounting hardware included. Only need drill, saw, and phillips screw driver tools.
HEAVY DUTY solid brass material mail slot to provide long lasting durability.
FIT door thickness 1-3/4" with included inside stainless steel sleeve. Prevent mail from falling into hollow core doors.
SPRING loaded front plate for secure tight closure.
FINISH available in satin nickel, matte black, and polished brass.
SIZE available in 13" x 3.625" (Opening 11" x 2-1/4")
EASY TO INSTALL : Instruction and mounting hardware included. Only need drill, saw, and phillips screw driver tools.
GC4400 SERIES
Model: GC4400
DESCRIPTION:
ANSI/BHMA A156.4, Grade 1
UL Listed, UL (10C) and UBC (7-2) Codes
Meets ADA requirements
Heavy duty full featured iron cast closer
Adjustable closing and latching speed
Back Check and Barrier Free
Optional Delay Action
Applications: Flexible heavy duty door closer designed for institutional and other rugged high traffic applications. Suitable for rooms or hallways that might be affected by high winds or air pressure differences.
Made of zinc alloy with a weather-resistant black finish
Improved sheer strength of mounting pins with stronger steel
Includes: mounting hardware for flush or floating numbers and simplified instructions
Tools needed: drill and drill bits, caulk gun, 1/4" wrench, center punch and hammer, razor knife, masking tape, and safety goggles
Truer thread fit and angle accuracy of the post
Direct replacement of cartridge type thermistor in E3D hotends.
A custom made thermistor encapsulated into an easy to use cartridge package.
Genuine Semitec 104GT thermistors used.
Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)
For 1/2" to 3/4" overlay doors
3 Dimensional (6-way) adjustment
Includes: mounting plates and screws
Blumotion can be deactivated with switch
Blumotion soft-close built-in
Writes on all material surface types.
Practical quiver protector with special clip in signal colour.
One-handed operation, fail-safe
Includes special leads, water jet resistant, 3 x green, 3 x blue, 2 x white
Ideal for marking tiles when wet cutting. 2.8 mm diameter x 125 mm length.
Tap wires without cutting.
Easy to install by hand.
No crimping or tools required .
Less resistance.
Vibration proof.
Reusable or permanent.
Fully insulated.
For use with 16-18 gauge wires.
Available in variety packs.
