Easter Countdown 🐰 Enjoy $12 Off
Order $80 or more. Exclusions apply.
Apr 24, 2025 23:59:00
Electrical
-
Parts Express Parts Express 3AG / AGC Screw Terminal Fuse Holder 5-Pack
This fuse holder is perfect for 1-1/4" fuse lamps and normal fuses. The screws on each side make it easy to connect wires without crimping or soldering and the extended plastic reduces accidental shock. Key Features Screw terminals for easy hook-up Extended plastic on each side to prevent accidental shocks and short circuits Holds common 1-1/4" size fuses and fuse lamps Economical 5-pack
$10.99
-
Parts Express Parts Express Cast Frame #10-32 Speaker Mounting Kit
Get that professional look with these black anodized hex head cap screws. The perfect mounting head for aluminum cast frame speakers. Large enough to secure the frame yet small enough to not deform paper and cork gaskets. Key Features 5/16" (8 mm) outer diameter head for holes in most medium size drivers
$9.99
-
Parts Express Parts Express Angled Locking Stacking Banana Plug with Dual Set Screws Poly Shell and Insulated Thumbscrew 2 Pair
Milled from solid brass, and 24-karat gold plated for maximum signal transfer, these locking, expanding, angled, and stackable, banana plugs feature a polycarbonate shell to provide protection from unintended contact while accepting up to 8 AWG wire. Key Features Locking pin separates the plug increasing retention force Stackable for use with bi-wired speakers Color-coded polycarbonate shells Dual hex screws for maximum cable retention 24 karat gold plated contact surfaces
$26.99
-
Parts Express Parts Express Binding Post Banana Jack with 1" Thread 2 Pair Black Gold
These connectors are designed with the audiophile in mind. 24 kt gold plating ensures the highest possible signal transfer and resists harsh environmental corrosion. These precision-machined connectors are made to last and last.
$19.99
-
Posi-Products® Posi-Lock® Assortment pack wire Connectors 10-24 AWG
Superior in-line crimp splices with just hand tightening! Temperature range of -23 degrees C to 120 degrees C. For use with 10-24 gauge wires. Available in variety packs.
$12.99
-
Parts Express Parts Express HDMI Cable Signal Tester
Easy to use; compact and portable Simply plug your cables into the tester''s DVI-F and HDMI-F connectors Diagnoses the cause of color shift, sparkle, or missing picture Tester can be located at the source or display end of the system Displays the status of each HDMI signal component
$30.99
-
Dayton Audio Dayton Audio BST-2 Tactile Bass Shaker 35 Watt
Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface
$38.99
-
Dayton Audio Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm
Super small size with low profile height 8 ohm impedance for use in almost any amplifier Includes mounting plate Adds sound to any surface
$22.99
-
Dayton Audio Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm
4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications
$70.99
-
Dayton Audio Dayton Audio DC160-8 6-1/2" Classic Woofer
Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 34 Hz free-air resonance
$45.99
-
Parts Express Parts Express Cable Pants 6mm 2-Conductor Black 10 pcs
Pack of 10 6 mm entry size, 3.5 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$10.99
-
Parts Express Parts Express Cable Pants 10mm 2-Conductor Black 10 pcs
Pack of 10 10mm entry size, 4 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$10.99
-
Parts Express Parts Express Cable Pants 8mm 2-Conductor Black 10 pcs
Pack of 10 8 mm entry size, 3.2 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$10.99
-
Dayton Audio Dayton Audio iMM-6 Calibrated Measurement Microphone
Precision condenser microphone for critical measurement For use with any smartphone or tablet with a 3.5 mm TRRS headset jack True omnidirectional pattern with calibrated flat frequency response Headphone/Line Out pass-through jack for test signals or listening Kickstand feature elevates and angles device and microphone capsule
$26.19
-
Pololu Pololu 1350 Micro Maestro 6-Channel USB Servo Controller (Assembled)
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver.
$44.99
-
Pololu Pololu 1645 Force-Sensing Resistor: 1.5" Square
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 1.5″ נ1.5″ (4 cm נ4 cm) active area With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications
$16.99
-
Pololu Pololu 1083 Universal Aluminum Mounting Hub for 6mm Shaft, #4-40 Holes
These universal mounting hubs are designed to work with most 6mm shafts, including round and 'D' shafts. Each hub has six mounting holes for 4-40 screws (not included), letting you mount custom wheels or mechanisms to your motors. 4-40 hex set screws (two included for each hub) allow secure coupling of shaft to hub. A 0.05' hex wrench (often the smallest size in SAE Allen wrench sets) is included for use with the set screws.
$13.90
-
E3D E3D V6 Heater Block for Sensor Cartridges
A replacement aluminium V6 heater block, suitable for E3D cartridge-style temperature sensors.
$21.99
-
E3D E3D V6 Plated Copper Nozzle 1.75mm x 0.40mm
Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle.
$22.99
-
E3D E3D V6 All-Metal HotEnd Full Kit w/ Bowden Add-on 24v
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V). The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance. Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more. Original E3D package. Assembly instruction available on E3D website.
$78.99
-
E3D E3D V6 Nozzle 1.75mm x 0.25mm
Genuine E3D V6 replacement nozzle for 1.75mm filament at .25mm nozzle size. This premium quality E3D replacement nozzle allows you to truly customize each and every print. This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D.
$19.99
-
E3D E3D V6 Silicone Sock 3 pack
Standard V6 silicone socks are made to insulate the heater block and nozzle for more efficient, stable thermal performance. Made from an inherently non-stick high-temperature silicone, these socks help keep your nozzles and block free from plastic residue. We supply the socks in a 3 pack because while they are designed to be as durable as possible, they will eventually wear away or perish. Your mileage
$12.99
-
Tower Mfg Tower Manufacturing 30438018 15 Amp GFCI Auto Reset, 18 Inch
CONVENIENT 15 AMP GFCI – Perfect for use with 15 AMP grounded outlets and plugs. DURABLE 3-PRONG CONNECTIONS – The cord features a NEMA 5-15P three-prong grounded plug and NEMA 5-15R receptacle. OUTDOOR-TESTED PERFORMANCE - UL- and CUL-rated for safe outdoor use. MEETS OSHA STANDARDS - Keep your workplace safe with this OSHA-compliant cord. RUGGED ASSEMBLY - Created with a 12/3 SJTW cord for trustworthy operation.
$29.99
-
Posi-Products® Posi-Twist® Wire Connectors 14-24 gauge
Quick & Easy: Twist On / Twist Off with your hand. No need for cramp connectors. Affordable: Same superior connection as Posi-lock with cost saving. High Temperatures. Vibration Proof. No Metal Parts. For use with 14-24 gauge wires. Available in variety packs.
$15.99 $14.99
You have seen 72 out of 72 products
Trending Products
-
-
$24.99
-
-
-
$86.99
-
$20.99
-
$22.99 - $29.99
-
$26.99 $24.99
