Easter Countdown 🐰 Enjoy $12 Off
Order $80 or more. Exclusions apply.
Apr 24, 2025 23:59:00
Electrical
-
E3D E3D Prusa MK3 MK3S V6 HotEnd Kit
Fits MK3 and MK3S Provides more reliability with retractions when using the MMU Prusa heatbreak & thermistor Maximum temperature: 285degC Drop-in replacement
$86.99
-
Tower Mfg Tower Manufacturing 30434009 15 Amp GFCI Plug, Right Angle Black
CONVENIENT 15 AMP GFCI – Perfect for use with 15 AMP grounded outlets and plugs. USER-ATTACHABLE CONVENIENCE – Easily replace the GFCI plug on any power tool or power cord. RELIABLE SAFETY - Independently-tested and UL- and CUL-listed for safe operation. DEPENDABLE AUTOMATIC RESET – Restore power to your device automatically after an interruption with the automatic reset. INCLUDES WIRING HARDWARE – Easily wire to cord gauges 16/3, 14/3, or 12/3 SJTW with the included hardware.
$21.99
-
Posi-Products® Posi-Lock® Connectors, 18-24 Gauge
Superior in-line crimp splices with just hand tightening! Temperature range of -23 degrees C to 120 degrees C. For use with 18-24 gauge wires. Available in variety packs.
$12.99 - $18.99
-
E3D E3D Hotend Thermistor Cartridge Replacement
Direct replacement of cartridge type thermistor in E3D hotends. A custom made thermistor encapsulated into an easy to use cartridge package. Genuine Semitec 104GT thermistors used. Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)
$13.99
-
Dayton Audio Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio
Real-time signal processing for ultimate control Complete audio customization for application specific installations Easy-to-use Graphical User Interface (GUI) All eight output channels have a fully adjustable 10-band parametric EQ Optional Bluetooth dongle (for streaming and app control) and wired remote available
$176.99
-
Posi-Products® Posi-Tap® Connectors, 16-18 Gauge
Tap wires without cutting. Easy to install by hand. No crimping or tools required . Less resistance. Vibration proof. Reusable or permanent. Fully insulated. For use with 16-18 gauge wires. Available in variety packs.
$12.99 - $26.99
-
Posi-Products® Posi-Tap® Connectors, 20-22 Gauge
Tap wires without cutting. Easy to install by hand. No crimping or tools required . Less resistance. Vibration proof. Reusable or permanent. Fully insulated. For use with 20-22 gauge wires. Available in variety packs.
$10.99 - $24.99
-
Posi-Products® Posi-Tap® Assortment pack wire connectors 10-22 AWG
Tap wires without cutting. Easy to install by hand. No crimping or tools required . Less resistance. Vibration proof. Reusable or permanent. Fully insulated. Variety Pack Includes: 2 qty Yellow (10-12 ga) 2 qty Blue (16-18 ga) 2 qty Red (20-22 ga)
$12.99
-
Parts Express Parts Express ST-17D BSR/Fisher Type Replacement Stylus Needle
Replaces the followung BSR needles: ST-16, ST-17, ST-18, ST-19 AND SINGLE Tip ST-20, ST-21 Used in the following BSR cartridges: SC5H, SC7M, SC8H, SC10H, SC12H Speeds: All Tip Material: .0007 Diamond Tip; Radius: .003 Synthetic Sapphire
$13.99
-
Dayton Audio Dayton Audio BPA-38G HD Binding Post Banana Jack Pair Gold
24kt. gold plating for best signal transfer and corrosion resistance 1-1/2" rear bolt mounts in speaker cabinets from 3/8" to 1" thick Large diameter knurled heads enable positive finger-tight connections Knurled shaft prevents post rotation
$15.99
-
E3D E3D V6 Extra Nozzle 1.75mm x 0.40mm
Genuine E3D V6 replacement nozzle for 1.75mm filament at .40 mm nozzle size. This premium quality E3D replacement nozzle allows you to truly customize each and every print. This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D
$14.99
-
Tower Mfg Tower Manufacturing 30438024 15 Amp GFCI Auto Reset, 2 Feet
CONVENIENT 15 AMP GFCI – Perfect for use with 15 AMP grounded outlets and plugs. DURABLE 3-PRONG CONNECTIONS – The cord features a NEMA 5-15P three-prong grounded plug and NEMA 5-15R receptacle. OUTDOOR-TESTED PERFORMANCE - UL- and CUL-rated for safe outdoor use. MEETS OSHA STANDARDS - Keep your workplace safe with this OSHA-compliant cord. RUGGED ASSEMBLY - Created with a 12/3 SJTW cord for trustworthy operation.
$31.99
-
Posi-Products® Posi-Tap® Connectors, 10-12 Gauge
Tap wires without cutting. Easy to install by hand. No crimping or tools required . Less resistance. Vibration proof. Reusable or permanent. Fully insulated. For use with 10-12 gauge wires. Available in variety packs.
$31.99 $30.99
-
Dayton Audio Dayton Audio UMM-6 USB Measurement Microphone
Precision condenser microphone for critical measurement and recording applications Connects to your PC or Mac via USB port True omnidirectional pattern and calibrated flat frequency response Rugged construction with high-quality components Compact design; includes sturdy carrying case with foam insert
$104.99
-
Parts Express Parts Express 8 Ohm 100W Non-Inductive Dummy Load Resistor
Non-inductive dummy load resistors are a must for bench testing amplifiers. Also useful for testing loudspeakers and other audio circuits requiring an 8 ohm load. 5% tolerance. Dimensions: 6-1/2" L x 1-9/16" W x 3/4" H; Inner width of the screw holes: 5.4 mm; Inside edge to inside edge measurement between the two screw holes: ~144 mm.
$20.99
-
E3D E3D Prusa Thermistor
A standard Semitec thermistor cartridge with a Prusa specific extension cable and connector. This is the same thermistor supplied directly to Prusa.
$16.99
-
E3D E3D Hardened Steel Nozzle V6 1.75mm x 0.40mm
Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
$25.99
-
Tower Mfg Tower Manufacturing 30396501-08 Manual-Reset 20 Amp GFCI Triple Tap Cord, 2 ft.
PORTABLE PROTECTION – Protect users, tools, and equipment from electric shock with this durable, transportable cord set. GROUND-FAULT SAFETY – Convert any standard electrical outlet into three shock-resistant outlets. HEAVY-DUTY DESIGN - Don't let rain stop your work—this weather-resistant cord is built for durability. SUPERIOR ELECTRICAL ACCOMMODATION - Get a greater electrical capacity with the 20 AMP relay. OUTDOOR-TESTED PERFORMANCE - OSHA-compliant and UL- and CUL-listed rainproof for safe outdoor use.
$36.99
-
Posi-Products® Posi-Tap® Connectors, 12-18 Gauge
Tap wires without cutting. Easy to install by hand. No crimping or tools required . Less resistance. Vibration proof. Reusable or permanent. Fully insulated. For use with 12-18 gauge wires. Available in variety packs.
$10.99 - $25.99
-
Dayton Audio Dayton Audio DSP-BT4.0 Bluetooth Data and Streaming USB Interface for DSP-408
Stream your favorite music to your Dayton Audio DSP-408 with the DSP-BT4.0. This Bluetooth dongle not only allows you to stream audio content directly to your DSP-408, it also allows you to wirelessly control your DSP with the DSP-408 Android or iOS app. Key Features Stream your favorite music to the DSP-408 with aptX Bluetooth Wirelessly control your DSP-408 from an Android or iOS device
$62.99
-
Dayton Audio Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm
Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure
$27.99
-
Dayton Audio Dayton Audio DSS2-BC Black Chrome Speaker Spike Set 4 Pcs
Rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system dramatically improves clarity, stereo imaging, and bass response. This is especially apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable finish. Barbed insert nuts and 6 mm threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes four cone spikes, four floor discs, four barbed insert nuts, and four threaded studs. Cone is 5/8", insert requires a 5/16" hole to be drilled prior to installation. • Dimensions: 9/16" diameter, 5/8" high (including disc).
$15.99
-
Tower Mfg Tower MFG 30440003 Auto-Reset 15 AMP Grounded 3-Prong GFCI 5-Outlet Adapter
RELIABLE PROTECTION - Protect users, tools, and equipment from electric shock with this durable GFCI adapter. INDOOR SAFETY - Add safety to interior outlets with this indoor-grade adapter. DURABLE 3-PRONG CONNECTIONS – The adapter features a NEMA 5-15P three-prong grounded plug and five NEMA 5-15R receptacles. DEPENDABLE PERFORMANCE - Independently-tested and UL- and CUL-listed for safe operation. LIGHTED POWER INDICATOR – Easily see that power is available with the "power on" indicator light.
$24.99
-
E3D E3D V6 Socks Pro 3 pack
Genuine E3D Parts ONLY works for HotEnds which use the E3D V6 style heater block 3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds These socks will keep your nozzle clean These socks really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles
$12.99
You have seen 24 out of 72 products
Trending Products
-
-
$24.99
-
-
-
$86.99
-
$20.99
-
$22.99 - $29.99
-
$26.99 $24.99
