Marks and writes on all surfaces including dusty, raw, oily, wet and dark surfaces
Sharpener built into the front of the cap
Convenient quiver cap with special clip
Water-soluble and water jet resistant refill leads are available in different colors
Diameter of leads 2.8 mm - Automatic lead support - stainless steel tube
Made in Germany
Adhesive: water-based (emulsion) acrylic
Carrier/backing: film
Thickness: 3 mils (carrier, adhesive)
Application temperature: 14F to 176F
Certifications: CCMC Report No: 13401-R; US Green Building Council ? LEED Point contributor product; Tested in accordance with UL 723
Marks on almost all kinds of dry surfaces.
Convenient quiver cap with special clip for perfect one handed handling.
Permanent ink, removable from glossy surfaces with alcohol and other usable solvents.
Extended tip made of stainless steel.
Self-adjusting and patented: up to 3 times more marking capacity by using full 7mm of the fiber nib's length of abrasion, instead of 2mm
Tap wires without cutting.
Easy to install by hand.
No crimping or tools required .
Less resistance.
Vibration proof.
Reusable or permanent.
Fully insulated.
For use with 12-18 gauge wires.
Available in variety packs.
Non-inductive dummy load resistors are a must for bench testing amplifiers.
Also useful for testing loudspeakers and other audio circuits requiring an 8 ohm load. 5% tolerance.
Dimensions: 6-1/2" L x 1-9/16" W x 3/4" H; Inner width of the screw holes: 5.4 mm; Inside edge to inside edge measurement between the two screw holes: ~144 mm.
E9000 RIM TYPE
Model: EF9000 (fire rated)
DESCRIPTION:
Heavy Duty Commercial Application
ANSI/BHMA A156.3, Grade 1
UL Listed, UL(10C) and UBC (7-2) codes
UL 3-hour fire rated
Available for 3’ and 4’ wide doors
Available with Electric Latch Retraction (see Electrified Hardware section)
Compatible only with Pamex E9000 trims & accessories
ONTARIO
Model #: FIS-5
DESCRIPTION:
Contemporary tubular interconnected locks
5-1/2” center-to-center
ANSI/BHMA A156.12 Grade 2
Meet ADA requirements
3-hour fire rated
AVAILABLE IN:
Single Locking Only
INSTALL - for cabinet, closet, and interior doors
SIZE : 3-5/16" x 1" roller catch face ; 2-1/8" x 1-5/8" strike plate
HARDWARE - mounting hardware included
FINISH - available in satin nickel, oil rubbed bronze, and black
MATERIAL - Heavy Duty Solid Brass
Solid Steel Cabinet Hardware Pulls
Excellent Quality European Style Cabinet Pulls
3'' Center To Center Mounting
5-3/4'' Overall Length
Standard Size Screws Included 8/32 x 1
Material: Solid Brass
Door Prep: Edge Bore - 3/4” x 11/16” Deep
Door Thickness: Fits 1-1/4” ~ 1-3/4”
Includes Strike Plates and 4 Wooden Screws
Overall Size: 3/4” x 6”
Material: Solid Brass
Projection: 13-/16” from Door Surface
Provided with Two Washers and Two #8 x 2-3/8” Precutable Phillip Head Screws
Mounting from Interior Through the Door, Vertical Screws Hole Center to Center 4”
Overall Size: 3-1/8” x 6”
Material: Knocker – Zinc Die-cast Viewer – Brass
Fits 1/2” Hole
Adjustable from 1-1/8” ~ 1-7/8”
Glass lens with 160 Degree Field of Vision
Projection: 5/8” from Door Surface
Overall Size: 1-3/4” x 4”
Complete with Screws
20 min. UL Fire Rated
Material: Solid Brass
Surface Mount Application
Projection: 3/4” from Door Surface
Provided with Two 1-1/8” Wooden Screws
Overall Size: 5-1/16” x 8-5/8”
Simply insert the dual head nail into the set tool to set the nail, then tap the molding or wood into place on the other side.
Features three sizes for a variety of products
Fully invisible mechanical fastener
Hardened steel for durability
Great for molding, trim work, furniture, and picture frames.
