Hand Tools

Fastcap 3 in 1 - Bend, remove, and align standard residential hinges. The Knuckle Bender is designed by a carpenter and allows you to quickly adjust any sagging door. The Knuckle Bender is adjustable to any size hinge, so making an adjustment is fast, simple and accurate every time. The built-in hinge pin remover allows you quickly remove any hinge pin.

Read more less

SeamFil resists moisture, detergents, and other household products, as effectively as the original laminate. In addition to standard joints, SeamFil works very well on cracks, chips and other imperfections where the dark substrate is visible.

Read more less

Never have torn pants from your tape measure again. With the SpeedClip securing your tape measure is a breeze. It easily clips over your pants or belt and can even hold a pencil.

Read more less

1. Series SR Motor:  230 Volt version of Foredom’s most popular and best motor for general use. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and our standard 39″ long key tip inner shafting for connecting to any of Foredom’s key tip compatible handpieces.  2. C.FCH-2 Speed Control: Foredom’s popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design. 3. H.20 Handpiece:  This “quick change” handpiece is for use ONLY with 3/32″ shank accessories and is popular with jewelers who work with that shank size and make frequent bur changes. Features a molded plastic front grip with tapered sides for easy and close handling. It has pre-lubricated ball bearings that do not require lubrication. This handpiece is key tip shaft compatible. 4. AK11 Accessory Kit (see complete product listing below): 43-pc. assortment of professional jewelers/metal working accessories includes Scotch-Brite EXL Wheels, Platinum White Compound, Rubber Bonded Abrasive Wheels, Jewelers Burs, Aluminum Oxide Sanding Bands, Felt and Cotton Buffs, Mounted Brushes, Mandrels, Engraving Burs, V Stone Wheel and more. 5. Flexible shaft grease Accessory Kit AK11 consists of the following(we reserve the right to substitute comparable accessories when needed): 3–mounted brushes 4–high speed steel fluted engraving burs 6–3M Radial Bristle Discs 12– 1/4″ x 1/2″ sanding bands in various grits 3–rubber bonded abrasive wheels, 4–satin finishers 2–screw mandrels 1-1/4″ Abrasive Cut Off Wheel rubber drum mandrel V Stone, muslin wheel unitized mounted point unmounted felt buff 1–tube of platinum white compound

Read more less

39" long flexible shafts and sheaths Two year warranty on 1/3 HP Series TX Motors and Controls 15,000 RPM Max Speed 115 Volt ONLY

Read more less

All new SR Motor Foredom's new 1/6 hp,ball bearing, hang-up style motor with speed up to 18,000 rpm. No. 44T Handpiece, FCT Control, No. 53 Accessory Kit, and Grease.

Read more less

Die cast handle Ball end Steel 130 degree angle cutting wheel General-purpose

Read more less

Long fine tip for precision Wide chisel tip for general use Great for tracing angles, marking tight places and marking inside holes The Long Nose Pattern Marker solves all your tricky layout problems. It has a 1-1/8" long fine point tip for marking inside holes and along walls while the other end has a wide tip for general use. Permanent & waterproof, it will be your go-to marker for any job. Comes in silver and black!

Read more less

Replace broken or worn shafts on these motors: M.SR, M.SRM, M.SRB M.TX, M.TXM, M.TXB M.LX, M.LXM, M.LXB M.PGX inner shaft replace shafts on these motors: M.SR, M.SRM, M.SRB Inner cable for flexible shaft motors Replacement shafts require a VERY light coating of Foredom grease before use. Fits Foredom Motors CC, SR, SRM, SRB,TX, TXM, TXB, LX, LM, LXB also Grobet, ProFlex flexible shaft motor

Read more less

Forged from Alloy tempered steel. Forged from Alloy tempered steel. This remover has the correct angle for removing staples of any size, from the smallest to the long leg staples and shredded materials. Quality made in New Jersey, USA

Read more less

Replacement Foredom flexshaft motor connector Has one threaded end and one end with a set-screw Fits motor models TX, SR (1/6 and 1/8 hp), LX, L, PGX, PG, S, and CC

Read more less

Self Adjusting No-Cut Bolt 5/16 - Solid Brass No Spin Base No Tip Washer

Read more less

The reliable C.FCT-1 is Foredom's most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom's C.SCT-1 and C.EM-1 controls. 7-1/4” long, 4-1/2” wide, 2-1/2” high, packaged wt-2 lb /1 kg., 4 Amps, 60 Hz Can also be used with these 115 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors. The C.FCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.

Read more less

Abrasives & Polishers Made in:United States Manufacturer: Milwaukee For use with Milwaukee 12 volt Copper Tubing Cutter model 2471 Precision machined for fast, accurate cuts Hardened steel with black oxide for long life Convex blade design reduces chipping

Read more less

INCLUDES:• (1) 1/2" Square Female to 7/16" Hex Female AdapterFEATURES:• Proprietary steel and heat treat process for maximum strength and durability• Heavy duty construction for fastening capabilities in all impacts• For use with Power Groove BitsSPECIFICATIONS:• Drive: 1/2" Square• Adapts To: 7/16" Hex

Read more less

GLASS PLIERS: These useful pliers are designed to break out or nip glass up to 1/4" thick (6.35 mm). Fletcher-Terry glass breaker pliers are great for every DIY project, making them a necessary addition to your glass-cutting tool kit. 2 TOOLS IN 1: This convenient hand-held tool can easily convert to a nipper or break-out plier depending on what you need. Use them to cleanly release your pre-scored piece from its surrounding glass, tile, or similar material. INTERCHANGEABLE JAWS: With multiple jaw options, you'll have the perfect tool that can be adapted to just about any breakout or nipping job. Available in a blister-style package. VERSATILE: Get these stained-glass and mosaic supplies and you'll be equipped to embark on any DIY or professional glass-art endeavor with confidence. Whether you are compiling the perfect starter set or are a seasoned glass worker, you'll be able to recognize this tool's usefulness. HOW TO USE: To run any pre-cut score, align the line with the bottom of the glass and gently squeeze. If you've made a good fissure, the tool should break the glass away cleanly.

Read more less

C.S. Osborne 8" Upholsterer's Regulator With Plastic Handle. High quality Steel. Plastic Handle. Size no. : 8 Overall length : 8" Blade length : 4" Gauge : 10

Read more less

Grease for all foredom flex shaft The flexible inner shaft should be checked, wiped clean, and relubricated with grease every 50 hours of use. With every 200 hours of use, the shaft should be thoroughly cleaned with solvent and lubricated

Read more less

The product is Easy installation and easy handling The product is manufactured in USA The product is easy to use and highly durable Cuts in hard/soft wood and plastic For machines that require 5" pinned blades

Read more less

Comfortable light weight aluminum housing Stays sharp longer Easy to sharpen to a fine point or dull point 5 Black Lds 3 Erasers

Read more less

Combines long-lasting durability of paint with the ease-of-use of a crayon Ideal for quality control, parts assembly, color coding, defect identification and general marking Marks on smooth, rough, rusty or dirty surfaces For use on metal, wood, plastic, concrete, rubber, glass, cardboard and paper Lead-free, non-toxic; standard Paintstik (11/16") uses #101 and #102 holder Marking range: -50 degree F to 150 degree F (-46 degree C to 66 degree C) Pack of 12, Black

Read more less