• Banner image for: Banner image for:

What's New

15 products


  • Dayton Audio DC160-8 6-1/2" Classic Woofer

    Dayton Audio Dayton Audio DC160-8 6-1/2" Classic Woofer

    Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 34 Hz free-air resonance

    $45.99

  • Dayton Audio TT25 PUCK Tactile Transducer Mini Bass Shaker

    Dayton Audio Dayton Audio TT25 PUCK Tactile Transducer Mini Bass Shaker

    The PUCK by Dayton Audio is a small tactile transducer or mini bass shaker that is intended to be used in Home Theater, Gaming, and Auto Sound applications. Now includes convenient surface mounting kit for quick and easy installation onto any flat surface. Key Features Add a new level of impact to games, home theaters, and car audio systems Includes surface mounting ring for quick installation onto flat surfaces Add tactile feedback to chairs and couches for the ultimate gaming and movie experience Small and easy to install even when space is at a minimum

    $17.99

  • Dayton Audio DSP-BT4.0 Bluetooth Data and Streaming USB Interface for DSP-408

    Dayton Audio Dayton Audio DSP-BT4.0 Bluetooth Data and Streaming USB Interface for DSP-408

    Stream your favorite music to your Dayton Audio DSP-408 with the DSP-BT4.0. This Bluetooth dongle not only allows you to stream audio content directly to your DSP-408, it also allows you to wirelessly control your DSP with the DSP-408 Android or iOS app. Key Features Stream your favorite music to the DSP-408 with aptX Bluetooth Wirelessly control your DSP-408 from an Android or iOS device

    $60.99

  • Dayton Audio UMM-6 USB Measurement Microphone

    Dayton Audio Dayton Audio UMM-6 USB Measurement Microphone

    4 reviews

    Precision condenser microphone for critical measurement and recording applications Connects to your PC or Mac via USB port True omnidirectional pattern and calibrated flat frequency response Rugged construction with high-quality components Compact design; includes sturdy carrying case with foam insert

    $93.99

  • Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm

    Dayton Audio Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm

    Super small size with low profile height 8 ohm impedance for use in almost any amplifier Includes mounting plate Adds sound to any surface

    $22.99

  • Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciter 24W 4 Ohm

    Dayton Audio Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciter 24W 4 Ohm

    Small size; just under 2" diameter, about 7/8" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 24 watt RMS power handling for high output

    $17.99

  • Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm

    Dayton Audio Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm

    Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure

    $27.99

  • Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm

    Dayton Audio Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm

    4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications

    $70.99

  • Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm

    Dayton Audio Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm

    Small size; just under 2" diameter, about 9/16" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1" voice coil for 10 watt RMS power handling

    $16.99

  • Dayton Audio PC68-4 2-1/2" Full-Range Poly Cone Driver

    Dayton Audio Dayton Audio PC68-4 2-1/2" Full-Range Poly Cone Driver

    Poly damped woven glass fiber cone controls cone break-up and provides a smooth roll-off High energy ferrite magnet increases BL for higher efficiency and increased output Rubber surround improves cone linearity and transients Smooth response with true full-range reproduction for simple speaker designs

    $16.99

  • Dayton Audio BPA-38G HD Binding Post Banana Jack Pair Gold

    Dayton Audio Dayton Audio BPA-38G HD Binding Post Banana Jack Pair Gold

    24kt. gold plating for best signal transfer and corrosion resistance 1-1/2" rear bolt mounts in speaker cabinets from 3/8" to 1" thick Large diameter knurled heads enable positive finger-tight connections Knurled shaft prevents post rotation

    $14.49

  • Dayton Audio DSS2-BC Black Chrome Speaker Spike Set 4 Pcs

    Dayton Audio Dayton Audio DSS2-BC Black Chrome Speaker Spike Set 4 Pcs

    Rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system dramatically improves clarity, stereo imaging, and bass response. This is especially apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable finish. Barbed insert nuts and 6 mm threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes four cone spikes, four floor discs, four barbed insert nuts, and four threaded studs. Cone is 5/8", insert requires a 5/16" hole to be drilled prior to installation. • Dimensions: 9/16" diameter, 5/8" high (including disc).

    $15.99

  • Dayton Audio iMM-6 Calibrated Measurement Microphone

    Dayton Audio Dayton Audio iMM-6 Calibrated Measurement Microphone

    Precision condenser microphone for critical measurement For use with any smartphone or tablet with a 3.5 mm TRRS headset jack True omnidirectional pattern with calibrated flat frequency response Headphone/Line Out pass-through jack for test signals or listening Kickstand feature elevates and angles device and microphone capsule

    $26.19

  • Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio

    Dayton Audio Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio

    Real-time signal processing for ultimate control Complete audio customization for application specific installations Easy-to-use Graphical User Interface (GUI) All eight output channels have a fully adjustable 10-band parametric EQ Optional Bluetooth dongle (for streaming and app control) and wired remote available

    $174.99

  • Dayton Audio BST-2 Tactile Bass Shaker 35 Watt

    Dayton Audio Dayton Audio BST-2 Tactile Bass Shaker 35 Watt

    Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface

    $38.99

Trending Products

Recently Viewed

© 2024 HardwareX Supply, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account