Trending Products
$23.99
$76.99
$20.99
$22.99 - $29.99
$26.99$24.99
Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 34 Hz free-air resonance
$45.99
The PUCK by Dayton Audio is a small tactile transducer or mini bass shaker that is intended to be used in Home Theater, Gaming, and Auto Sound applications. Now includes convenient surface mounting kit for quick and easy installation onto any flat surface. Key Features Add a new level of impact to games, home theaters, and car audio systems Includes surface mounting ring for quick installation onto flat surfaces Add tactile feedback to chairs and couches for the ultimate gaming and movie experience Small and easy to install even when space is at a minimum
$17.99
Simply drill 3/8" hole insert cutting head and compress handles. Gives you the ability to make square holes for fuse holders, special connectors displays etc. Material to be nibbled is placed in the gap between the punch and blade channel. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal. A scribe line can be followed by looking down on work in this position. A slot is cut by making successive cuts.
$15.99
Stream your favorite music to your Dayton Audio DSP-408 with the DSP-BT4.0. This Bluetooth dongle not only allows you to stream audio content directly to your DSP-408, it also allows you to wirelessly control your DSP with the DSP-408 Android or iOS app. Key Features Stream your favorite music to the DSP-408 with aptX Bluetooth Wirelessly control your DSP-408 from an Android or iOS device
$60.99
Precision condenser microphone for critical measurement and recording applications Connects to your PC or Mac via USB port True omnidirectional pattern and calibrated flat frequency response Rugged construction with high-quality components Compact design; includes sturdy carrying case with foam insert
$93.99
Super small size with low profile height 8 ohm impedance for use in almost any amplifier Includes mounting plate Adds sound to any surface
$22.99
Small size; just under 2" diameter, about 7/8" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 24 watt RMS power handling for high output
$17.99
Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure
$27.99
4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications
$70.99
Small size; just under 2" diameter, about 9/16" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1" voice coil for 10 watt RMS power handling
$16.99
Poly damped woven glass fiber cone controls cone break-up and provides a smooth roll-off High energy ferrite magnet increases BL for higher efficiency and increased output Rubber surround improves cone linearity and transients Smooth response with true full-range reproduction for simple speaker designs
$16.99
24kt. gold plating for best signal transfer and corrosion resistance 1-1/2" rear bolt mounts in speaker cabinets from 3/8" to 1" thick Large diameter knurled heads enable positive finger-tight connections Knurled shaft prevents post rotation
$14.49
Rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system dramatically improves clarity, stereo imaging, and bass response. This is especially apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable finish. Barbed insert nuts and 6 mm threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes four cone spikes, four floor discs, four barbed insert nuts, and four threaded studs. Cone is 5/8", insert requires a 5/16" hole to be drilled prior to installation. • Dimensions: 9/16" diameter, 5/8" high (including disc).
$15.99
Non-inductive dummy load resistors are a must for bench testing amplifiers. Also useful for testing loudspeakers and other audio circuits requiring an 8 ohm load. 5% tolerance. Dimensions: 6-1/2" L x 1-9/16" W x 3/4" H; Inner width of the screw holes: 5.4 mm; Inside edge to inside edge measurement between the two screw holes: ~144 mm.
$20.99
Pack of 10 6 mm entry size, 3.5 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$10.49
Pack of 10 10mm entry size, 4 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$9.99
Pack of 10 8 mm entry size, 3.2 mm conductor size Ideal when building your own speaker cables Add a professional look to your customized cables
$10.99
Precision condenser microphone for critical measurement For use with any smartphone or tablet with a 3.5 mm TRRS headset jack True omnidirectional pattern with calibrated flat frequency response Headphone/Line Out pass-through jack for test signals or listening Kickstand feature elevates and angles device and microphone capsule
$26.19
Parts Express Steel Mesh 2-Piece Grill for 8" Speaker BlackConvenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Heavy-duty expanded steel mesh design. Grill fits 8" speaker with a maximum outer diameter of 8-1/4". Overall diameter: 8-3/8". Sold individually.
$16.99
Real-time signal processing for ultimate control Complete audio customization for application specific installations Easy-to-use Graphical User Interface (GUI) All eight output channels have a fully adjustable 10-band parametric EQ Optional Bluetooth dongle (for streaming and app control) and wired remote available
$174.99
Replaces the followung BSR needles: ST-16, ST-17, ST-18, ST-19 AND SINGLE Tip ST-20, ST-21 Used in the following BSR cartridges: SC5H, SC7M, SC8H, SC10H, SC12H Speeds: All Tip Material: .0007 Diamond Tip; Radius: .003 Synthetic Sapphire
$13.99
Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface
$38.99
Easy to use; compact and portable Simply plug your cables into the tester''s DVI-F and HDMI-F connectors Diagnoses the cause of color shift, sparkle, or missing picture Tester can be located at the source or display end of the system Displays the status of each HDMI signal component
$30.99