Home Hardware
HardwareXSupply HardwareX Supply French Cleat Picture Hanger
HEAVY DUTY - French cleat hanger is made of 5mm thickness aluminum. WEIGHT SUPPORT - Available in 4 inch (Up to 50 lb), 12 inch(Up to 80 lb), 18 inch(Up to 90 lb), and 30 inch(Up to 120 lb). MULTI PURPOSE - Ideal tool for hanging mounting wall panels, whiteboard, cabinet, shelf, headboard, art, frames, pictures, mirror and more SLEEK - design leave minimum gap between the wall and brackets. This will provide a near flush mount separation from the wall. EASY TO INSTALL – The wall mounting brackets hardware kit will include self-tapping screws that can be installed in minutes. FLEXIBILITY – Interlocking wall mounting bracket allow easy removal just lifting the panel.
$16.99 - $50.99
DIG Dig Drip Irrigation 1/2" Compression Tee, 700 OD
High impact plastic Color coded UV-resistant Secure and easy installation without glues or clamps Operating pressure: 10 to 30 PSI
$24.99
DIG DIG Drip Line 100', 12" Spacing, 1/4" Dripline, 52 GPH
Use 1/4" barb fittings Resistant to chemicals and fertilizers commonly used in landscaping Flexible tubing for easy installation Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures
$24.99
DIG DIG Drip Line 100', 9" Spacing, 1/4" Dripline, 52 GPH
9 inch pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length Use for planter boxes, window boxes, closely planted or narrow areas, vegetable gardens, or looped around roses, shrubs, trees, for gravity feed systems, and for green roofs No special tools or glues necessary for installation, Allows water to drip directly to the root zone, delivering a constant deep watering Can be used in both new and existing landscape areas Use for commercial and residential applications
$24.99
DIG DIG Drip Irrigation 1/2" Compression Coupling, 700 OD
Made with high-impact UV-resistant plastic Secure and easy installation without glue or clamps! CHECK YOUR TUBING SIZE BEFORE USE: One size does not fit all: This fitting is .700 OD with black insert FITS: drip poly tubing with .680 OD, .700 OD and .704 OD Maximum operating pressure: up to 60 PSI Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
$21.99
Nuk3y Nuk3y Carriage House Garage Decor Hardware Set
Carriage House Garage Door Decorative Hardware Set - Spear StyleScrew Included ( Screw on Type)Set Include : 2 Handle & 4 Spear HingeCarriage House Garage Door Decorative Hardware Set perfect for wood steel garage doors.Garage Décor
$29.99$22.99
Don Jo Don-Jo EL-103 630 Satin Stainless Steel Extended Lip Strike
Don-Jo EL-103/9103 630 Satin Stainless Steel Extended Lip Strike Width: 3" from screw hole to tip Height: 2-1/4"
$12.99
Nuk3y Nuk3y 3 1/2" x 3 1/2", Spring Hinge 5/8" Radius, UL Rated
PACKED with wood and machine screws SIZE 3.5-inches by 3.5-inches, 5/8 Radius SPRING hinge for automatic self closing doors STEEL matertial with steel barrel UL LISTED -10C for Positive Pressure Fire Test Available in Satin Nickel, Oiled Rubbed Bronze, and Polished Brass finishes
Nuk3y Nuk3y Spring Crash Chain w/ Vinyl
Meet ANSI/BHMA A156.16 Solid twisted chain w/ gray vinyl cover Compression springs at one end Complete w/ wooden screws
$10.42
Nuk3y Nuk3y Spring Crash Chain
Meet ANSI/BHMA A156.16 Solid twisted chain Compression springs at one end Complete w/ wooden screws
$9.42
Cal Royal Cal Royal Sliding Door Lock, 2-3/8" backset
Sliding Door Lock 2 ⅜” Backset With easy pop-up finger pull Easy installation onto pocket-type interior doors
Cal Royal Cal Royal Pull Plate Ellipse Bar
Stainless Steel Push/Pull Plates Easy installation Boxed and individually polybagged Conforms to ANSI/BHMA A156.6 (for J401 Pulls)
Cal Royal Cal Royal Pull Plate
Stainless Steel Push/Pull Plates Easy installation Boxed and individually polybagged Conforms to ANSI/BHMA A156.6 (for J401 Pulls)
Cal Royal Cal Royal Swing Clear Hinge, 3.5" x 3.5", 5/8" Radius, 2BB (2 Pack)
Size length of Joint: 3.5" 5/8 Radius Corner Minimum Clearance Required (Dimension A): 2-1/8" (54mm) Full Mortise Material: Steel, Stainless Steel, Brass. Gauge: .123 Five Knuckle Two Ball Bearings Machine Screw Size: 1/2 x 10-24 Wood Screw Size: 10 x 1 F.H. Square Corner Number of Holes: 6
Cal Royal Cal Royal Swing Clear Hinge, 3.5" x 3.5", 2BB (2 Pack)
Size length of Joint: 3.5" Minimum Clearance Required (Dimension A): 2-1/8" (54mm) Full Mortise Material: Steel, Stainless Steel, Brass. Gauge: .123 Five Knuckle Two Ball Bearings Machine Screw Size: 1/2 x 10-24 Wood Screw Size: 10 x 1 F.H. Square Corner Number of Holes: 6
Nuk3y Nuk3y 4" x 4" , Spring Hinge, UL Listed
MEET ANSI/BHMA A156.17 UL Listed; UL10C for Positive Pressure Fire Test Steel material with Steel barrel Timely Pack with Phillips flat-head screws, Hex-wrench and Locking pin
Nuk3y Nuk3y 6" Surface Bolt
Surface Screws Application Provided two receptacle Plates and 6 Wooden Screws Overall Size: 5/8” x 6” Available in satin nickel, oiled rubbed bronze, and polished brass finish.
Nuk3y Nuk3y 4" Surface Bolt
Surface Screws Application Provided two receptacle Plates and 6 Wooden Screws Overall Size: 5/8” x 4” Available in satin nickel, oiled rubbed bronze, and polished brass finish
Nuk3y Nuk3y Quick Field-Installed Roller Catch
Surface Mount Application Single Plastic Wheel for Silent Closing Adjustable Screw Slot Self-Locating Strike Complete with Screws
Don Jo Don Jo Kick Plate 8" x 34" (Tape On)
Kick Plate
Don Jo Don Jo 3-1/2" x 15" Solid Brass Pull Plate
Pull Plate
Don Jo Don Jo 3-1/2" x 15" Solid Brass Push Plate
Push Plate
Nuk3y Nuk3y Swing Bar Door Guard
Die Cast Zinc Door Guard, Satin Nickel Finish This Security Lock Offers Reliable Protection Against Intruders Allows 2in. Opening For Viewing Visitor Or For Locked Ventilation Fasteners Included
Nuk3y Nuk3y Universal Latch Guard Protector
Material: Steel for US10B & US15 Stainless Steel for US32D• Gauge: 12ga.• Furnished with carriage bolts, washers &acorn cap nuts• Overall Size: 3” x 11”
You have seen 120 out of 137 products